Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: dj3ng on 2015-04-17, 22:25:56

Title: RC-1216H - SteppIr SD 100 - Firmware 4.4 up - lost serial settings
Post by: dj3ng on 2015-04-17, 22:25:56

Hello all,

last weekend I updated all my remoterig components with the newest firmware. Works fine, only trouble with RC-1216h 2.8v  to 4.16v. I lost the connetion between SteppIR Controler and SDA 100. Missed seriall settings: "No settings available for this device".  Downgrade to 2.8 and try higher version step by step, find serial settings only until Firmware version 4.0.
Need higher version no serial settings ?
At the moment RC-1216h with SteppIR works fine with V4.0 ...

73 de DJ3NG 

   

Title: Re: RC-1216H - SteppIr SD 100 - Firmware 4.4 up - lost serial settings
Post by: Jan (Microbit) on 2015-04-20, 10:10:44

Since version 4.0 the serial settings used for SteppIR always are:

9600 baud
8 data bits
1 stop bit
No parity

Do you mean that v4.0 works but not version 4.16?