Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: dj1aus on 2015-05-25, 14:21:01
-
Hi,
I'm fighting with my settings of my setup (IC-7200 connected to the Radio Side RRC, transparent internet connection to a standard Windows PC and RRC-1258MkII connected with USB and serial with another stable highspeed internet connection)
I stupidly didn't backup my configs before I started to change settings (espescially the IO Settings) so I cannot get to a point I were already.
Can someone please be so kind and post the radio side configuration?
Radio Settings
Serial Settings
and IO Settings
Thanks
DJ1AUS
Alexander
-
Update:
I went to the remote location and did reset my REMOTE Unit.
The settings are now the default:
Radio:
COM0 baudrate: 9600
COM0 data bits: 8
COM0 stop bits: 1
COM0 parity: 0
COM0 Program mode 3 char timeout: 2
Use USB Com Port as COM0: 0
Serial:
COM1 mode: 0
COM1 baudrate: 9600
COM1 data bits: 8
COM1 stop bits: 1
COM1 parity: 0
COM1 rts/cts: 0
COM1 terminator (hex): 00
Use USB Com Port as COM1: 0
COM2 mode: 0
COM2 baudrate: 9600
COM2 data bits: 8
COM2 stop bits: 1
COM2 parity: 0
COM2 terminator (hex): 00
Use USB Com Port as COM2: 0
COM3 mode (USB-COMFSK): 10
IO Settings:
OUT0: I/O
OUT1: I/O
OUT2: Keyer