Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: kk4mqm on 2015-06-10, 22:35:15
-
Need help getting the auto switching to work; set up with ts 480, can select and switch antennas via the software manually and all is well, but when auto is selected there is complete silence in the radio indicating no antenna is selected. Thanks Phil
-
Hi
you need o connect a CAT cable from Radio-RRC com2 to the Radio Cat port. The radio and com2 need to be set to the same baud rate (9600 baud) and com2 should me set to mode4. In the Antenna switch you enter the IP of the Radio-RRC.
73 de mike