Remote Rig

RRC-Nano => General => Topic started by: SM0HXB on 2015-06-22, 14:02:52

Title: RRC Nano service BETA 2.0
Post by: SM0HXB on 2015-06-22, 14:02:52

Hi Roland

RRC Nano services Beta 2.0 works fine with my Samsung Galaxy Tab S 10.5 with Android ver 5.02.
The only thing that seems strange is when I press "Diconnect" in the Kenwood app, it will restart the radio RRC. This happens every time I've been online and then press the "Disconnect" button.
This does not happen when I use my Samsung S5 phone that use the Android Native SIP / VOIP stack.
RRC firmware 2.86

Regards
SM0HXB / Göran

Title: Re: RRC Nano service BETA 2.0
Post by: roland on 2015-06-22, 21:36:35

Thank's for the input Göran. Will have a look at that

Title: Re: RRC Nano service BETA 2.0
Post by: roland on 2015-06-23, 08:51:20

Found an error in the new SIP stack that causes problems when disconnecting.
There will be a Beta 2 out as soon as that is fixed.

Thanks for the input

Title: Re: RRC Nano service BETA 2.0
Post by: roland on 2015-06-23, 09:39:13

-- 2015-06-23 09:20 --
The beta has been update to BETA2

A problem when disconnecting has been fixed.
SIP-BYE was sent continuously instead of once.

Please download and reinstall the beta.

Title: Re: RRC Nano service BETA 2.0
Post by: SM0HXB on 2015-06-23, 14:10:10

Thanks Roland, now it works without rebooting the radio RRC when I disconnect.
I think the RRC Nano is a great app. Thanks for your work.

Regards
SM0HXB / Göran

Title: Re: RRC Nano service BETA 2.0
Post by: roland on 2015-06-23, 14:28:29

Thank's Göran. :D