Remote Rig
RRC-Nano => General => Topic started by: oh6eec on 2015-06-25, 15:17:01
-
Hi Ronald,
RRC Nano service BETA 2.0 works with the nexus 9 tablet, but when I disconnect and reconnect again connection does not work. It says "connected" and shows green light, but no sound or frequency on the screen. I have to kill RRC nano apps and restart to get it working again. Have any ideas for this problem?
-
Have you tested to download and install again. An update was done a couple of days ago.
----
-- 2015-06-23 09:20 --
The beta has been update to BETA2
A problem when disconnecting has been fixed.
SIP-BYE was sent continuously instead of once.
Please download and reinstall the beta.
---
-
It should be updated version because I installed it on 23.6 evening.
-
Could you send the settings you are using to connect in a PM to me.
And which client you are using. Kenwood or what?
That way I could have better view on what happens by connecting from here
-
Sent email
-
I'm using a DROID Maxx and the Elecraft client with BETA2 and having a disconnect issue. I'm able to connect briefly but immediately disconnect. Radio turns on then off. Thanks for all your efforts!
-
I'm using a DROID Maxx and the Elecraft client with BETA2 and having a disconnect issue. I'm able to connect briefly but immediately disconnect. Radio turns on then off. Thanks for all your efforts!
Which firmware version does the radio RRC have? 2.85 had a bug that could cause it to behave like that.
-
Ahhhh, its 2.85. Will upgrade and try again.
Sent from my Nexus 6 using Tapatalk
-
Installed 2.86. All is well. Seems to work as good as my Nexus 6 native stack. Nice work.
Sent from my Nexus 6 using Tapatalk
-
Installed 2.86. All is well. Seems to work as good as my Nexus 6 native stack. Nice work.
Cool! 8)