Remote Rig
RRC-Nano => General => Topic started by: dl2nd on 2015-09-10, 10:10:26
-
Hi Roland,
the problem with the disconnect still exists (the TS-2000 still running after disconnect).
You told me, may be it is a timing problem ?
73,
Uwe
-
Oh really. I could repeat the problem here and made some minor changes and after that I could not repeat it.
That was published and I considered it as fixed. But apparently not then. I could not test against a TS-2000, used a TS-480.
However I don't the radio-type is important. There must still be something in the Nano-App then. I will check on it again.
-
Ok Roland,
thank you.
If you need to test it, you can use my radio.
73, Uwe
-
hi,
I'm suffering the same issue with a difference that when then disconnection happens the TS2000 is turned off.
I'm running FSK QSOs and it would be helpful maintain connection without touching the app.
73 de petri
-
hi,
more testing here.
now I see a link with disconnection be due to screen saver activation. I extended time when screen saver (black screen) is activated from default to 10min and disconnections doesn't appear any more frequently. actually I have not had any, so I don't know if disconnections disappeared.
73 de petri
-
Will have a check on what effect screensaver has.
Have to finish up VFO-support on Yaesu first thought (a day or two)
-
Hi Roland,
the problem with the disconnect is still present, isnīt it ?
Uwe
-
Hi Roland,
is there a chance to fix the problem with the disconnect ?
73, Uwe