Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: VO1HP on 2015-11-16, 01:08:10
-
Running K3/0 Mini and K3 new install.
I am in the midst of trying to find out why CW keying has changed from normal good quality keying to erratic and jumbled. When first installed about two weeks ago all worked fine but something has changed. Operated SSCW with no problems..but now last day or so .... Can only send two dots and third one is "stunted" ....best term I can think of....and a longer series of dots cannot send H or 5 at all.... .....dashes are sent in groups of three. Keying from M1...M4 is Ok coming directly from K3 and not going over the link. Will be driving to the site tomorrow to check....
In meantime is someone willing to share with me their RR/C and RR/R settings so that I can double check where I am...I have been changing settings and did not keep original list.
Frank VO1HP
invl160@gmail.com
-
Hi
The only setting concerning this is the "Key delay" setting, higher value means more buffering before transmitting is started. This makes it more tolerant against jitter on the internet.
73 de mike