Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: K1IKE-Joe on 2016-01-05, 17:47:45

Title: Elecraft K3 E1a and E2a mic cables
Post by: K1IKE-Joe on 2016-01-05, 17:47:45

I'm working on an Elecraft K3 remote setup.  I was looking at the two factory cables for the microphones connections and they both have the RJ45 pin 7 wired to the mike jack pin 5.  The drawings in the USER MANUAL do not show this connection.  Pin 5 of the K3 is used by the button on the microphone and is a programmable feature (OFF or ON).  Is this feature supported by the 1258?

73, Joe, K1ike

Title: Re: Elecraft K3 E1a and E2a mic cables
Post by: sm2o on 2016-01-05, 19:59:17

Only Mic audio and PTT are supported in the K3 setup

73 de mike