Remote Rig

RRC 1258 Support på Svenska => Konfiguration av RRC 1258 => Topic started by: SM5LW on 2016-03-07, 15:41:40

Title: ICOM 706MkII - how to setup for CW
Post by: SM5LW on 2016-03-07, 15:41:40
I am installing a set RRC-1258 MKII to control an ICOM 706MkIIg. I have followed the instruction with the splitting the separation cable etc. I can turn on the radio and audio as well as all controls seem to work. However, the CW is not working. is it necessary to connect the Radio-RRC PAD output to the radio key input (see manual page 94) or should it be sufficient with just the separation cable?

Dag /SM5LW
Title: Re: ICOM 706MkII - how to setup for CW
Post by: sm2o on 2016-03-07, 16:22:25
Yes you should connect the PAD output to the straight key input.

/micke
Title: Re: ICOM 706MkII - how to setup for CW
Post by: SM5LW on 2016-03-08, 07:59:01
Thanks for the quick reply. / Dag