Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: W2SM on 2016-09-10, 21:20:47

Title: profile vs exporting BIN file
Post by: W2SM on 2016-09-10, 21:20:47

Is there any major reason to save different settings in Profile as opposed to exporting a BIN file?

Jim
W2SM

Title: Re: profile vs exporting BIN file
Post by: dj0qn on 2016-09-10, 21:29:07

Absolutely!!! You can toggle between five different profiles that you only setup once each, vs having
to load files and lose track easily of which one you are using. Sort of like using memories on a rig vs.
manually tuning or entering a frequency.

73,
Mitch DJ0QN / K7DX

Title: Re: profile vs exporting BIN file
Post by: W2SM on 2016-09-11, 02:53:18

Thanks Mitch.

It'd be nice if there was a command that let you set a profile for both the Control and Radio settings at the same time.  Maybe a future version will do that!

73,

Jim

Title: Re: profile vs exporting BIN file
Post by: dj0qn on 2016-09-11, 16:52:44

Hi JIm,

I am not sure why anyone would need that.....the radio RRC is usually static and the control RRC needs
to switch between multiple remote locations like I do. Also, since the radio is in a different location, I
would think that it would be technically not possible to implement that.

73,
Mitch DJ0QN / K7DX