Remote Rig

Info from Remoterig => News => Topic started by: sm2o on 2010-11-30, 20:48:52

Title: Problem found with negotiations about Ethernet speed and mode
Post by: sm2o on 2010-11-30, 20:48:52
We have found a problem when the RRC negotiate the ethernet settings with the switch. If you use "Auto prefer 10FDX" it will by default select 10FDX and this mode is not working properly packets are lost, it shows specially when working CW. Change to "Auto" or 10HDX then it will work as normal again. We will fix this and release a new version ASAP.

/mike