Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: kc6wrd on 2017-01-22, 21:18:29

Title: SIP contact box
Post by: kc6wrd on 2017-01-22, 21:18:29

I use my FTM-350 control head (via RRC-1285 on my own LAN)  to control the FTM-350 body as mountain top remote base on the same LAN segment. To do so I use the IP address in the SIP contact box. I also use the control head in my ONSTAR WiFi equipped vehicle using the "Own host name" in the SIP contact box for DDNS access. Each time I move between home and vehicle I have to log into the remote rig setup and change the SIP contact box which is quite cumbersome. Is there and way around this or any plans to add a toggle switch to select between SIP info?

Thanks.

Title: Re: SIP contact box
Post by: sm2o on 2017-01-22, 21:40:43

check the chapter about profiles, you can use the CW-speed knob to change between the profiles

/micke

Title: Re: SIP contact box
Post by: kc6wrd on 2017-01-22, 23:49:46

Awsome! Works Great.
Thanks.