Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: bernd on 2017-07-17, 18:45:22
-
Hello I have a problem with my rcc 1258mk
I can operate the radio on my home network, but if I enter in the rcc my ip address with the correct port then I can not reach my radio
In the router is port 13000 13002 open it has worked but now with a new mobile router and also on the old mobile router I can not reach my radio anyone has any idea
Thanks
-
Bernd,
It can be any number of things; the information you provided is not sufficient to determine the problem.
You didn't specify if the mobile router is on the control or radio side. It generally can not work on the radio side,
but I can provide details if that is the case.
Otherwise, you are welcome to mail me at dj0qn (at) darc.de and I can send you my networking checklist that may
help you locate the problem.
73,
Mitch DJ0QN / K7DX
-
Hi
Yes correctly the mobile router is connected to the control set in the control site i have entered my ip address sip contact at stand on port 80
In my router port 13000 13002 is open
A checklist can help i hope thanks
-
Like I wrote before, send me a short mail if you want the checklist. I don't otherwise
know your e-mail address.
73,
Mitch DJ0QN / K7DX
-
hi mitch
i send a email to you
thanks
-
hi mitch
I send you a mail
73
-
And I responded to you yesterday. Check your spam folder if you didn't get it.
73,
Mitch DJ0QN / K7DX