Remote Rig
Webswitch 1216H Support in English => Hardware, Cabling, Installations => Topic started by: N5NHJ (I8NHJ) on 2017-11-22, 19:18:48
-
I've post some questions about this but I'm not getting any answer, strange.
I'm trying to use the COM PORT RTS as PTT and DTR as CW features.
On the control side I have configured COM 2 according to the manual.
On the radio side I have OUT 0 as PTT, OUT 1 as FSK, and OUT 2 as CW.
Looking at the radio box status web page, I have never seen the outputs turning high when triggering the COM2 lines.
Anything I'm missing?
Thanks,