Remote Rig
Webswitch 1216H Support in English => Hardware, Cabling, Installations => Topic started by: k.haber on 2018-02-04, 20:16:42
-
Hi,
Have somebody controlled an TS590s via ARCP590 and RRC1258?
In the moment (for testing) I am running 2 RRC1258 in my Local Area Network.
Audio streaming is doing very well, but the "CAT" connection to ARCP590 is not stable!
First I am using COM2 afterwards COM1 with different baud rates (9600, 19200, 38400).
Always the same: After some minutes well working, the ARCP590 "CAT" connection goes down,
while audio streaming is continuing very well. After pressing the ARCP590 "CONNECT" button
the "CAT" goes up again for a few minutes.
Would be nice if anybody have an idea or can help! vy 73 de Klaus, OE2KHM
-
Klaus,
I have sometimes noticed that the driver is somewhat unstable under certain conditions.
I am not sure if anything can be done to solve it. What I do is a work-around: I use a good
Prolific USB to serial converter and go to the RRC's COM2 as a standard serial connection.
This method is rock solid.
73,
Mitch DJ0QN / K7DX
-
Hi,
same problem with CAT conecction between TS590SG and Acom amplifier.
CAT comes down and return after some seconds, random. Look at TS590.....