Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: Paul-WA4AA on 2018-04-20, 06:22:23

Title: Connection Confirmation
Post by: Paul-WA4AA on 2018-04-20, 06:22:23

Anyone, Everyone,

On the Radio-RRC, I have a (RJ-12) connection from the TTL to my Icom using a 3.5mm C-IV connector. Can I address the RJ-12 jack located on the front of the Radio-RRC? a toggle that turns the TTL on or off! How can I be certain that data is passing from the Control-RRC through the Radio-RRC at the TTL RJ-12 connection?

Thanks,
Paul-WA4AA

Title: Re: Connection Confirmation
Post by: sm2o on 2018-04-20, 08:46:30

The TTL connector is also called com0 baudrate settings etc are done under Radio settings. if you use a USB cable at the control-RRC you connect your pc program to the virtual com port com0 and activate USB under radio settings. If you use a RS-232 cable you connect it to RRC com2 and set com2 to be in parallell with com0 under serial settings

73 de mike