Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: DL3LSM on 2011-01-27, 09:16:45
-
Hi,
just a short question. Am I right that I can use a ready made RJ45 CAT5 cable to connect the TS-480 with the AUX/MIC connector on the RRC? Does it have the shield on the right pin??
Thanks and 73 de Mario, DL3LSM
-
I am using a purchased CAT 5 cable to connect the TS480 to the Radio-RCC at the AUX/MIC port and have had no problem. In fact all of my cables have been purchased through the Internet as standard cables.
None of them have been specially made.
w7fz Robert
-
Thanks Robert!
73, Mario