Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: W1UE on 2018-10-26, 20:02:48

Title: Using an outboard Winkey with RR unit
Post by: W1UE on 2018-10-26, 20:02:48

I've looked through the documentation for the RR units, and am not quite sure of the best way to do this.  I want to use an outboard Winkey (not the RR Winkey unit) to key CW.  Is there any "easy" way to do this, such as just turning off the RR keyer?  How about keying through a cable for the Aux/Mike input?

Dennis W1UE

Title: Re: Using an outboard Winkey with RR unit
Post by: dj0qn on 2018-10-26, 21:03:32

Hi Dennis,

This is indeed covered in the manual, but a little hard to find. Look at the bottom of
page 94 (I/O Connector) and page 95. Also Appendix B.

73,
Mitch DJ0QN / K7DX