Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: wb7ely on 2019-09-19, 06:41:25

Title: KPA500 amplifier remote control using RRC1258 COM1 and TS480
Post by: wb7ely on 2019-09-19, 06:41:25

I seeing some threads on this topic and still it is unclear if I can use the RRC COM 1 port on the RRC 1258 control to connect RS232 to my PC and run the remote utility. And then I'd connect another RS232 cable from the KPA500 to RRC Radio. I did see some talk on the com ports wired 'backwards' or using a null modem. I also have a webswitch 1216H perhaps that might work easier> If anyone could shed some light on this, would be much appreciated.
de Dave WB7ELY

Title: Re: KPA500 amplifier remote control using RRC1258 COM1 and TS480
Post by: dj0qn on 2019-09-19, 10:40:15

Hi Dave,

Yes, you can use COM1 for remoting another serial device if available. In the case of a "Twin" configuration, such as the K3, the COM1 is usually used for CAT and would be
unavailable in that case. Otherwise, use a null-modem cable for the "backwards" COM1 on the radio RRC.

73,
Mitch DJ0QN / K7DX