Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: aj4eo on 2011-03-14, 14:31:35

Title: TS-2000 Mic
Post by: aj4eo on 2011-03-14, 14:31:35

I have my RRC-1258MkIIs working but the microphone does not key the transmitter.  On the TS-2000 I did make my own cable but I checked it many times and I do have it pinned out correctly as per the documentation.  I turned on vox and no audio at the radio.  Anyone have this problem but found the fix?

Title: Re: TS-2000 Mic
Post by: dj4mz on 2011-03-15, 09:02:42

Hi,

when using VOX check the "Continuous RTP Tx" Setting. See manual page 47!

vy 73
Simon, DJ4MZ

Title: Re: TS-2000 Mic
Post by: aj4eo on 2011-03-16, 02:28:44

Thanks for the tip.  Now I really know I have the cable wrong.  Now audio through this mic to the radio.  Everything else works.  I do have a mic with an rj45 conector on it and when I connect it, the incoming audio stops.  Anyway I still have the problem.  I guess it could be the internal strapings but that seems good unless it is reversed.

Title: Re: TS-2000 Mic
Post by: VE7GTC on 2011-03-19, 22:53:04

I could not get my TS-2000 mic to key either. However, both my Heil Goldline and the TS-480 mic worked perfectly with the TS-2000.