Remote Rig

Webswitch 1216H Support in English => General discussion forum => Topic started by: KB0FX on 2020-07-23, 16:52:46

Title: 1289H Antenna Switch changed to 1216H Web Switch After Firmware Update - MAC Bad
Post by: KB0FX on 2020-07-23, 16:52:46
After applying the version 4.27 update to my 1289H it now thinks it is a 1216H Web Switch. In addition the MAC now invalid. See the details below. When the unit boots show s the following Setup Manager.

1534283977!=15342839

That is the serial number of the unit.

How can I fix the invalid MAC address?
Why does the unit think it is Web Switch?

Mike - KB0FX


Company   Microbit
Product   1216H WebSwitch
Model   HAM
Software   4.27
Hardware   3
Bootloader   1.13
Build   Dec 22 2016 11:42:03
S/N   1534283977
PID   4
Uptime   0 Days, 0 Hours, 2 Mins, 41 Secs
========================================   
MAC   11:00:00:00:9c:1d
IP address   192.168.0.236
Netmask   255.255.255.0
Gateway   192.168.0.1
DNS   192.168.0.1
========================================
Max available memory   18501
DNS status   Error, failed to resolve remoterig.com!
Dynamic DNS status   Inactive
NTP status   Disabled
Ping status (watchdog)   Off
Active profile   Default
Last WD Reset   18
TCP Error counter   0
Title: Re: 1289H Antenna Switch changed to 1216H Web Switch After Firmware Update - MAC Bad
Post by: sm2o on 2020-07-23, 18:39:28
Hi
open the box and check the serialnumber sticker and email or PM it to me, then I can help to recover it. if you have noticed the ddns hostname I can use it also.

73 de mike
Title: Re: 1289H Antenna Switch changed to 1216H Web Switch After Firmware Update - MAC Bad
Post by: KB0FX on 2020-07-24, 15:33:57
Mike - I sent you the requested information via PM.

73

Mike - KB0FX