Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: George W1EBI on 2020-08-10, 03:38:31

Title: FTdx-5000 dual receive
Post by: George W1EBI on 2020-08-10, 03:38:31

How do I get dual receive with the FT5000?  The remote radio shows Status Dual Rx=1.  The control radio shows Status Dual Rx=0.  I cannot get the control radio to give me VFO-B audio on a different frequency in my right ear, I hear only VFO-A audio in both ears.

George W1EBI

Title: Re: FTdx-5000 dual receive
Post by: sm2o on 2020-08-10, 09:39:28

Hi

There is only the Dual-RX setting in the radio-rrc which need to be active, but you have to setup the radio correct also, and use a stereo cable.

very old RRC did not support dual rx. Here you can see the different versions of the RRC

http://www.remoterig.com/wp/?page_id=1395 (http://www.remoterig.com/wp/?page_id=1395)

73 de mike