Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: WD0AJG on 2020-10-07, 03:45:10
-
I had my units working. was connected and did a disconnect then I can't connect. At that site I also have a teamviewer computer and checked the router and the radio unit was not connecting to the network. I had it hooked up to the USB and it came up with a erronous huge serial number (117835012). via setup but it does not show mac . So we did a full reset push of the reset button for 20+ seconds and it did come up and had base IP address of 192.168.0.228 and via the microbit setup I was able to get it back to the 192.168.10.67 needed to access the router but it still has the false serial in the net info box I get all the rigt stuff for linking to the router but below I get:
Device connected!
FW/HW version suddessfully retrieved
SW version succesfully retrieved
117835012!=11783501
it also now has a new set of addresses for the ddns settings and I can not change them back to what I had before and with the huge serial it is not logging in
username shows rrc1258-117835012
when I go search for it it does not show up via it's own host name that is now different from previous
the old original serial should have been 13889.
How to I get it reset to access?
-
now I need to add, out of chance I tried to link back to the old name and it now links that I have it hooked to router with correct IP but going to the unit it still shows the wrong info:
This is what it shows on the radio unit via webaccess (knew the ip address and I had moved the webpage to a diff port) .
new stillwater+ NOT REGISTERING
r46gud28.ddns.remoterig.com
rrc1258-117835012
pw= grru7jaw
the old name was :
vtd8kgu1.ddns.remoterig.com and I can link to that old name?
-
13889
192.168.10.67
PID = 12
http://192.168.10.67/pid?29346695b4ec5f2b76240e2173738577-12
-
Jan, not sure I understand your post but if you wanted this:
Name Value
Company Microbit
Product 1258
PID 4294967295
Version 7
HW 8
Software 2.95
Bootloader 1.14
Compiler 4.6.2
Build May 4 2019 08:32:26
ROM/RAM 488400/44304
ETH-RAM 3000 (max 3kB)
USB-RAM 16376 (max 16kB)
Battery-RAM 4
ResetSrc 0 [3]
Last WD Reset 9
Uptime 0 Days, 10 Hours, 35 Mins, 48 Secs
Serial number 117835012
MAC address 00:1e:fd:07:7b:a4
IP address 192.168.10.67
Netmask 255.255.255.0
Gateway 192.168.10.1
DNS 192.168.10.1
Wi-Fi network module not present
Webserver 1
------------------------------------------------------
also it has reverted to default ip once when it reset.
WD0AJG
-
ok, if i was to try that "command" ? I had to put in the port that I have that unit on and tried that input and got this in return
CRC mismatch, PID not changed!
WD0AJG
-
I have sent instructions via email
/mike