Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: EA7TB on 2021-01-21, 15:23:17

Title: No connected
Post by: EA7TB on 2021-01-21, 15:23:17

Hi.
Connected in the local network works correctly.
I modify the parameters so that the control module connects to the wifi of an iphone.
After several vicissitudes, I have managed to connect the iphone with the control rcc.
I have verified that this module detects the IP of the radio module.
I have redirected ports 13000 to 13010 to the IP of the RCC-Radio. (on the router)
But it doesn't connect?
I attach the two configuration files.
Can you help me to connect?
Regards. Manuel.

Title: Re: No connected
Post by: dj0qn on 2021-01-21, 15:30:48

Manuel,

Offhand, I see two mistakes:

1) You don't have the same SIP password on the RRC's. They must be identical, including large/small letters

2) COM0 on the control RRC should be the same as on the radio RRC, i.e. 57600 in this case.

73,
Mitch DJ0QN / K7DX

Title: Re: No connected
Post by: EA7TB on 2021-01-21, 16:40:01

Thanks Mitch.
I also had to put the same Serial Setting, which were not the same.
73'
Regards. Manuel EA7TB