Remote Rig

Webswitch 1216H Support in English => Configuration, Webswitch 1216H => Topic started by: wb7ely on 2021-06-07, 16:51:21

Title: Uploaded new firmware 4.59 and relays disappeared
Post by: wb7ely on 2021-06-07, 16:51:21

Still having problems with this webswitch. Upgraded the firmware using the setup manager. Uploaded v4.59 for 1216H HAM edition and now there's a NEW Problem.There are no relays showing in the menus. It appears to be setup as a Rotor controller only, no relay output selections on any pages. I can access it over the network but it will not work over the microbit ddns, even though all the items appear correct.
thanks for any assistance
de Dave WB7ELY

Title: Re: Uploaded new firmware 4.59 and relays disappeared
Post by: wb7ely on 2021-06-08, 17:16:41

Webswitch is unusable, there's no help, I'm stranded with this webswitch and very disappointed in the microbit help and forum. Mitch where are you? ...So I am going to throw it in the garbage, or the junkbox. Going to buy this other webswitch which has a ready and willing help dept:
 https://www.controlbyweb.com/webrelay-quad/

Title: Re: Uploaded new firmware 4.59 and relays disappeared
Post by: sm2o on 2021-06-09, 21:23:42

The forum is mainly for user to help each other I can't monitor every post all the time. And during summer and vaccation times it even more difficult. If you want help from me send me a email.

if the WS shows the the rotor picture it's probably set to be a rotor control. check the advanced settings page "function type"

73 de mike