Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: dg6ed on 2021-06-21, 14:52:51

Title: RRC Control fetches old DDNS address
Post by: dg6ed on 2021-06-21, 14:52:51
I run 3 identical systems (RRC-1258 MKII with IC-E2820) in 3 locations with daily changing IP addresses using standard ddns.remoterig.com. Radio- and Control- boxes are remote-powered off during the night. The System was working very reliable for months.

Since Sat, 19-Jun-2021 two of them have problems on Conrtol side, to get the latest updated IP address. Despite http://ddns.remoterig.com/status/resulthost.php already shows the renewed IP address, they still show 3...4 hours after power-on in the Control box web page Status in 'Other party' AND 'DNS status' the one of the day before.

About 4 hours after power-on the Control box realizes the new IP address and works as usual.

Any idea, what's going wrong?
Title: Re: RRC Control fetches old DDNS address
Post by: sm2o on 2021-06-21, 15:01:49
Hi there was a short break in the the ddns servers on saturday evening, that may have have caused it. We do our best to keep the system up, but if you need 100% relialbility you may use a commercial service, we do not guarantee 24/7 service especially during vaccation times

73 de mike
Title: Re: RRC Control fetches old DDNS address
Post by: dg6ed on 2021-06-21, 15:15:43
Thanks for fast reply, even at Mid-Summer periode!

I appreciate all your service, thanks & 73 de DG6ED

Holger