Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: N7TWP on 2021-09-29, 07:42:45
-
Hi, I am looking for advise, cabling, etc. to control a1289 Antenna switch using an IC-705. Can this be done w/o the 1258 modules? I do have a pari of 1258 MKII modules if this helps for configuration.
In any case I am interested to see if any others have experience or general advise on how to setup band switching with the CIV data sent from an IC-705?
73
N7TWP I'm good on QRZ.
-Karl
-
Yes you can conncect a CI-V cable direct to the white 5 pin socket at the control pcb inside the AS-1289
73 de mike
(https://www.webswitch.se/picturepaster/3098ca2cc1834a1bac6a7f805fb5fa04.jpg)
-
Hi sm20,
Excellent diagram. Nicely done. I will definitely mod a cable I have and add the diode. I came from using a 706 and a 1258 MkII Setup. I cannot wait to have band switching with the AS-1289 up and running on the IC-705.
The next questions is for any IC-705 operators out there... the 705 doesn't (appear) to have an external 3.5mm CI-V jack -- or does it?
I'm looking at pg 2-3 of the IC-705 Basic Manual. For the 705, CI-V connectivity was moved to Bluetooth and USB.
Any work around to get to get the CI-V signals out of USB? Perhaps some sort of USB to Serial Dongle? Or is Bluetooth the best way?
73 all!
-Karl N7TWP