Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: VA2EBI on 2021-12-20, 19:07:56
-
What are the settings to use a bug instead of a paddle via the RRC1258? I could not seem to find a definitive statement in the user manual.
George VA2EBI
-
If you with "bug" mean an external keyer, it's the same as a straight key from the RRC point of view. You connect it to the IO-jack (RJ45) in0 and set Control-RRC IO In0 = keyer. The Keyer settings should be the same as when you use a paddle connected direct to the Control-RRC
73 de mike
-
Thanks, Mike. Follow-up question: If I have set N1MM with RRC COMExtra to COM3 for Winkey, do I need to set COM2 Mode to Mode 8? I tried to make that change several times, but after reset I still had COM2 Mode as “Logical parallel with COM0”. I can’t tell if I am using the Winkey emulator or not.
George VA2EBI