Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: N4CQ on 2022-07-14, 17:05:55

Title: RR Control Error
Post by: N4CQ on 2022-07-14, 17:05:55

My system was working well yesterday.  Today, I cannot activate the system.  The LED power lighton the RR box is flashing slow green.  The manual says that this means that the box is trying to connect to the ethernet.

My internet connection is good.  Other equipment connected to the LAN are working. The ethernet cable is good. I tried another cable.  Same results. There have not been any changes to the RR Control settings.

Any thoughts on the problem or fix?  Does the RR Control box have a problem?

Dave
N4CQ

Title: Re: RR Control Error
Post by: N4CQ on 2022-07-14, 17:08:32

I should add that another user at a different location can access the system.

Title: Re: RR Control Error
Post by: sm2o on 2022-07-15, 09:32:56

News
-July 14 -2022

-The DDNS service is not working for some users. We are trying to localize the problem. It will be fixed as soon as possible

Title: Re: RR Control Error
Post by: N4CQ on 2022-07-15, 12:08:24

Thanks for the feedback.  I came to that conclusion after reading some other posts on this subject.  Thanks very much for your help.

Dave
N4CQ