Remote Rig
RRC 1258 Support in English => Configuration of Routers, Firewalls, etc => Topic started by: sndtubes on 2022-07-16, 19:54:22
-
I’m sorry guys, I am clueless when it comes to this networking stuff. I have a couple of stupid questions
I want to have 2 remoterig sets going on my network at one time. Do I change all of the udp settings on one of them to 13003, 13004 and 13005 along with the main port from 80 to something like 73? Anything else I need to do
The remoterig control had sip contact to some ddns server. Didn’t work. I changed to the radio ip and it worked. But only on the local network. Any pointers here?
Thanks for your help
-
Hi
yes the second Remoterig set need to be configured with different portnumbers compared to the first set (in both units) if they should be used trough a NAT router. You also need to add portforwarding for the second set in the Radio site router
73 de mike
-
Got them going. Thanks!
-
Well all is not quite well. Both units come up and work separately. They even work for a short time simultaneously. But after a few minutes one of them will lose synch and it’s connection. One radio is a k3 and the other is a 7100. Any ideas?
-
A bad router maybe. Many users including my self using several Remoterigs connected to the same NAT router.
73 de mike