Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: Mitch on 2022-12-01, 04:37:07
-
Can anyone help me out, I have now for the last three day's trying to turn on the Kenwood 480 radio and getting a problems.
Turning on I hear the bleep, face of radio will not light up and a small bleeping from face of radio. Have tried different power supplies and will not light up.
73 Gary
-
HI Gary- I have a 480 also. This indication is usually due to the Control RRC will not connect to the Radio RRC. Have you had successful connects in the past? If so, then check your connections. Has anything changed? If not then you will need to ensure all your router ports are configured. This is not for the faint of heart, even if you are an experienced router/network guy. I thought I was and then needed mitch to login to my system and help me figure it out. These are complex boxes but once connected and working, they are priceless.
de
//Dave
WB7ELY
my RRC page: https://www.valhallatreefarm.com/WB7ELY/rrc3/rrc.htm
-
I have same issue.
Did you find any solution?
Best 73