Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: ON4AOI on 2011-09-28, 13:27:26
-
Hi All,
this topic is only for twin users and specially those that use FTDX5000.
I like to know what MAIN and EDSP software is in both Rigs and if all is working ok.
to view press GEN+50+ENT and power ON
If possible like this
RRC RIG MAIN EDSP Comments
2.41 FTDX5000 0117 0530 OK
2.41 FTDX5000 0120 0537 NOT OK, turning VFO results in loosing AUDIO and SMETER stalls etc.
for those that like to send in private pse use on4aoi_pda@skynet.be
Guy ON4AOI
-
Hi Guy,
That is maybe a good point..... as you know, I am having some problems with
my Twin FT-2000's. The one in the station is the newest firmware, but the control
one is the one before. I wonder of that could be making a difference?
73,
Mitch DJ0QN / K7DX
-
Hi Mitch,
yep that is certainly an issue,
On our experience you need to have
the same firmware/software in both tranceivers.
Guy ON4AOI
-
Hi Guy,
I updated the firmware in the control FT-2000 today.
I don't have time to make a detailed check of the control inconsistency problem, maybe
that has been improved. Also, the sound may be louder now, but that needs some more
testing as well. It for sure did not solve the problem with the antenna selection in split.
73,
Mitch DJ0QN / K7DX
-
Another one
RRC RIG MAIN EDSP Comments
2.41 FTDX5000 0119 0537 NOT OK, turning VFO results in loosing AUDIO and SMETER stalls this is because the remote radio goes out have IPCAMERA there now.
Guy