Messages

1

General discussion forum / Re: blackboxes don't connect anymore

« on: 2025-05-19, 11:11:54 »

I was perhaps a little panicky ?!
It works again in any case .
I haven't changed anything. I don't know why no connection was possible for a few hours.

vy73 Robert

2

General discussion forum / blackboxes don't connect anymore

« on: 2025-05-19, 09:35:42 »

Hello first...
Previous story : i have been operating a YaesuTwin system for a few years now.
Until yesterday evening it ran without any problems
But now the blackboxes don't connect anymore.
i can open the config page, even on the antenna side via laptop and anydesk.
so the 2 blackboxes are running as usual.

Is something wrong with remoterig.ddns ?

maybe someone can suggest a solution, i would be grateful in any case.

vy73  Robert  DL2MIJ

3

General discussion forum / Re: Audio dropouts with Yaesu twins

« on: 2024-05-28, 17:55:34 »

Thanks for your answer Mike !

I can't rule out that it's the PC.
What comes to my mind is, that i use 2 soundcard interfaces, local/remote.
maybe my miniPC can't handle it ?

vy73  Robert

4

General discussion forum / Audio dropouts with Yaesu twins

« on: 2024-05-28, 06:50:43 »

Thanks for reading !
The error has been on for a few days.
Sometimes only twice a day, sometimes every half hour.
Transmit signal is still there but without audio.
I have to restart the Radio and then it works again.
I have restarted the RRCs and router, application update was done but the error is still there.

I am using "audio quality" 7 maybe there is a better solution for FT8 ?


Please help

vy73 Bob DL2MIJ

5

Konfiguration av RRC 1258 / Re: no contact with mine RRC-1258 (radio version)

« on: 2023-06-26, 09:53:03 »

TNX for replay Mike !

It displayed my RRC1285 correctly, but couldn't open it in Browse.

A friend advised me to restart the network and it helped.
something has probably hung up

vy73  Robert

6

Konfiguration av RRC 1258 / no contact with mine RRC-1258 (radio version)

« on: 2023-06-24, 06:29:34 »

Hello, although the setup manager finds my RRC-1258 (radio version), I can no longer open it with "Browse".
Neither in the local network nor over the Internet lets reach her.
Has it worked flawlessly for many years and nothing has changed?
Please help..

vy73  Robert

7

General discussion forum / Re: YaesuTwin: no power output when using split

« on: 2023-02-15, 18:18:24 »

Hallo Mitch,
gibt es Lösungsvorschläge für dieses Problem ?
Ich hab schon lange kein CW-Split Betrieb gemacht , ausgerechnet bei FT8WW ist das  passiert.

mit vy 73  Robert  DL2MIJ

8

General discussion forum / Re: Split operation on 160m

« on: 2018-11-10, 00:13:57 »

Hello Mike,
Split working from 160 to all ather Bands , but not inside..?!

TNX anyway for replay !

a fb weekend

vy73  Robert

9

General discussion forum / Split operation on 160m

« on: 2018-11-09, 02:04:29 »

Hello,
and TNX for reading !
I had following problem with my Yaesu twin System:

No  split operation  on 160m, 
all other Bands 6-80 work split.

I had no more idea and happy for any Note.

vy73  Robert  DL2MIJ 

10

General discussion forum / HAMNET ?

« on: 2018-07-29, 20:53:43 »

Using someone HAMNET , only one hit when i search ?

I had  following problem : i can  connect my Yaesu twin system, make few QSOs.
But from time to time, short interruptions .
so only a few FT8 decoddes  , although  the Band is full.
I tries different audio qualität settings, but no improvement .

Any idea welcome..

vy73  Bob  DL2MIJ 

11

General discussion forum / Re: Dynamic DNS status Error, 19

« on: 2017-06-07, 20:30:39 »

Hello Mike,
yes i using Remoterig ddns.

Now back from work running the system ?!
I  will observe and hope the problem gone self ..

TNX replay !

vy73 Bob 

12

General discussion forum / Dynamic DNS status Error, 19

« on: 2017-06-07, 09:24:21 »

 Hello ,
i had since one week  problem with my Yaesu twin system.

I becomme  a   "Dynamic DNS status Error,  19"
After a short time without Power : Dynamic DNS status OK
It would seem that  all OK now, but no conjunction and i can`t  open the webpage of the Radio RRC.

He running about 2 Years  without  problem , nothing changed  ?
The Antenna Switch  is  OK.
A Router restart doesn't help`s

Any suggestions?

vy73 Robert

13

Configuration, Webswitch 1216H / Re: Webswitch 1216H + G-2800DXA

« on: 2016-11-10, 10:33:48 »

Mike thanks !
i will look for an new on and test again..

vy73  Bob 

14

Configuration, Webswitch 1216H / Re: Webswitch 1216H + G-2800DXA

« on: 2016-11-10, 00:15:21 »

TNX for your replay Mike and SRI for my  late response  !
YES i understand now , the output is not serial from the Yaesu Rotor , i had now a RotorCard.

But one question please : I don`t no, is possible  the 1216S is damaged by my own fault , i put him 1st time wrong in the WS ?  Now is the WS out ( the smal greene light going out and i  find him no more in my network) when i plug the 1216S in the right position.. Without the 1216S i had no problem to config the WS.

vy73  Bob

15

Configuration, Webswitch 1216H / Webswitch 1216H + G-2800DXA

« on: 2016-09-20, 21:49:12 »

Hello , i need assistance with my  1216H Webswitch.

I like to  remote my Yaesu G-2800DXA Rotor  with an WS + 1216S cable.
1st of all ,  is additional hardware necessary  ( a serial connecting cable Rotor to 1216S is  here.. )   , the Rotor with a mini din serial port ?   

And , when i push the 1216S  in the WS , the greene LED going out and i can`t  find  the WS in net.  WS config is  no problem , but no more with the 1216S  ?
Pin 1 ( red )   is on Pin 1..

Thanks for you help.
Bob - DL2MIJ