Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - DM1CG

Pages: [1] 2 3 ... 5
1
Configuration, RRC 1258 / WEB Site not reachalbe
« on: 2023-10-25, 15:55:36 »
Hy all

All is running well since years ... but now, I have to swapp the ports.

But I am not possible to connect the website of the RRC.
Firmware 2.95 

All browsers dindt open the website on the RRC units.
Saw it only one time on an older IE.

Have some on an idee ?

vy 73 de Carsten
DM1CG

2
Configuration, RRC 1258 / Error DDNS Status
« on: 2022-04-04, 10:36:59 »
Hy Guys

I got Dynamaic DNS status - Unkown, Error 19

If I check the status I get an IP adresse ... but not my.

Own IP: 188.126.166.80    <- isnt my IP
DDNS IP: 86.107.103.218
CHK IP: 86.107.103.218

Last reply:

HTTP/1.1 200 OK
Date: Mon, 04 Apr 2022 08:35:37 GMT
Server: Apache/2.2.22 (Ubuntu)
X-Powered-By: PHP/5.3.10-1ubuntu3.48
Vary: Accept-Encoding
Content-Length: 5
Connection: close
Content-Type: text/html

nochg


At External IP - my "now" right IP is standing

?
 

Both Side V2.95

vy 73 de Carsten
DM1CG


3
I was using one side DM5AL adapter and on the other side - homemade cable

Bothside home made running .

Bothside DM5AL doesnt work.

73 de Carsten
DM1CG

4
Configuration, RRC 1258 / problem connect local network
« on: 2022-04-03, 13:16:50 »
hY

i have a problem , that my RRC didnt connect to my local RRC (IC706)
remote all is running :-(

FW 2.95

via telnet and debug Control Unit:

ping: send 8.8.8.8
ping: recv 8.8.8.8 [4ms]
discoveryRx: Cmd Scan
duplex: New Audiocoding 102 (8 KHz)
duplex: New Audiocoding 102 (8 KHz)
New UDP CmdTxPort=11040
duplex: New Audiocoding 102 (8 KHz)
duplex: New Audiocoding 102 (8 KHz)
duplex: New Audiocoding 102 (8 KHz)
New UDP CmdTxPort=11040
R-> Radio ON requested (2)
rtp enable [192.168.99.169/11050 192.168.99.169/11050]
R-> Connection established, radio ON, audioQuality=2
duplex: New Audiocoding 102 (8 KHz)
R-> Radio '8V off' from panel
R-> Sending '8V is off'
rtp disable
audio = IDLE
mic-volume = -12
ping: send 8.8.8.8
ping: recv 8.8.8.8 [4ms]

"Remote UNit"
duplex: New Audiocoding 102 (8 KHz)
duplex: New Audiocoding 102 (8 KHz)
duplex: New Audiocoding 102 (8 KHz)
New UDP CmdTxPort=11040
rtp enable [192.168.99.131/11050 192.168.99.131/11050]
audio = DUPLEX
CP-> Sending 8V: 0 Mute spk: 0
CP-> audioQuality=2
duplex: New Audiocoding 102 (8 KHz)
CP-> Panel '8V off' from radio
CP-> Radio/Panel OFF (0)
rtp disable
duplex: New Audiocoding 102 (8 KHz)


Remote is sending Panel/8V is off and rtp disable ?!

Both sides same config.
 Where is my error ?

73 de Carsten


5
General discussion / Re: RRC Micro 1274A - SIP 401 eRROR
« on: 2022-02-26, 21:42:22 »
hy all

access to the path - Firewall defender Widnows

Access to remote - made a new "profile" without an SIP Password - running.

73 de Carsten


6
General discussion / Re: RRC Micro 1274A - SIP 401 eRROR
« on: 2022-02-26, 11:26:06 »
HY Mike

i connect from the same network , so i use the IP Adresse.

But today the next problem , i am not able to start RRCMicro 1.11 because an access to the path isnt allowed :-(
I desinatlled and install ist abgain - same issues.

best 73 de Carsten

7
General discussion / RRC Micro 1274A - SIP 401 eRROR
« on: 2022-02-26, 02:08:19 »
hY ALL

K3 with RRC1258 can connect by K3/0 also RRC1258 but not by  RRC Mirco.

I see an SIP Error 401 , inside TCP DUMP

SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP

any idea?
73 de Carsten


 




8
Configuration, RRC 1258 / 2 x K3/100 - no PTT
« on: 2020-03-30, 11:58:17 »
Hy all

the combination K3/100 <RRC> K3/100  have no PTT in my case.
Only the button XMIT set the remote K3/100 in to TXing.

PTT IN and the PTT at the Microphone did not have an effect.

I read several time - some had the same issuses but not solution.

I am using the settungs in the RRC UNits form the K3/0 mini - and that works with PTT
Both K3/100 transmit without the Remote Connection with PTT in / PTT Micro and Xmit

any Info ?

bets 73 de Carsten

9
Configuration, RRC 1258 / Re: 2 x K3/100 without RRc-Twin
« on: 2020-03-24, 10:08:53 »
Solved

The RS232 of one K3/100 had problems.
With another K3/100, it runs with the same settings as for the K3/0 mini - 100%

best 73 de Carsten
DM1CG

10
Configuration, RRC 1258 / 2 x K3/100 without RRc-Twin
« on: 2020-03-21, 15:32:10 »
Hy

had very mutch problemens with my K3/0 mini (PTT ERR and no starting connection) and now I have the Idee to connect 2 x K3/100 over the same way.

I make the connection on the Controlside with a null modem RS232 cabel like in the user maual - but nothing happend.'
RS232 Rate is on bothside 38400.

Test it in in lokal network - no fw no router.
Both RRC are connectable on teh Web end.

RRC control side tested with another K3/0 mini (100% OK)

Where is my mistake

vy 73 de Carsten
DM1CG


 

11
Hy all

I dublicate my settings in a new box. FW 2.95.
After "restoring" the config the profile name are gone - Profile 1-5

how I can restore the profile names

73 de Carsten

12
Tnx for the answer Mike

I never tested it befor.
I will update the cable.

vy 73 de Carsten
DM1CG

13
Hello all

see yesterday a new "bug" .
If my RRC Radio lost the 12V my K3 switch to TX if the radio is one.
I have the last firmware 2.95 inside the Unit.

PTT come over teh PTT IN RCA not via RS232 CAT.

any Idea ?

best 73 de Carsten
DM1CG

14
Configuration, Webswitch 1216H / to much broadcayst pakets
« on: 2018-11-16, 15:30:45 »
Hy all

We had a problem , with a device what is sending some broadcastes and mitvated the webswitch to send also many broadcasts.
So mutch that we have to close the ethernet port to the Webswitch.

In that case we are wondering us , why and what the webswitch is sending pakets inside the EThernet- if nobody is on thew ebserver or using the Seteup PRG.

The picture is that Ethernet Port , weeks ago

is there a way so reduce the Broadcast / Multicast traffic

vy 73 de Carsten
DM1CG

15
Configuration, RRC 1258 / TS2000 - RC2000 doesn´t start
« on: 2018-01-19, 15:28:47 »
Hello all

I reactivat my TS2000 with RC2000. around 2 years ago all was working well.
Now the RC2000 dont start the display.
I tested two RC20000.
I also test them on teh TS2000 I will to remote.

Only one time I saw the Dispaly - 144.148 my EME QRG.
The RC20000 was without yellow backlight.

I reset the conrol unit... but it doen´t help.
It look a little that teh 8V are not really there.
any idea ?

best 73 de Carsten
DM1CG

edit:
My radio side have a problem to save the settings, in the debug mode I see this error:
Unknown form variable 'BXYZ1'!
Settings submitted!
----------------------------------------

Pages: [1] 2 3 ... 5