Topics

1

Configuration, RRC 1258 / K3/0 SIP Establishment Problem

« on: 2014-06-18, 02:25:43 »

I just just updated my K3/0 to 4.86.  I now have a link establishment problem with the remote radio 40 miles away via the Internet.  The radio turns on, passes audio, but the display stops updating with 7150 in VFO A and TERM in VFO B.  The front panel buttons have no affect as well.  The radio did connect properly on a couple of occasions, but most of the time it fails as I just described.  When I was running 4.67 everything worked flawlessly.  I should mention that the RemoteRig units at both ends are running 2.78, 1.10, and 4.62.

Has anyone else had the same problem?  If so, what was the fix, if any?

73 de Rick, N6NR

2

Configuration, RRC 1258 / Irregular CW Keying at Radio

« on: 2013-05-26, 04:06:12 »

I am having a problem on CW when I connect to my friend's K3 about 30 miles away.  The dots and dashes on his radio end are very irregular, which makes my send unable to be copied.  On this end they sound correct.  I have looked at some buffer settings, but nothing seems to help.  Sending CW with my own K3 on my home LAN works just fine.  Anyone else have this problem and found a fix?

3

Configuration, RRC 1258 / K3 radio does not turn on

« on: 2013-05-08, 06:51:28 »

I just purchased a new K3 and K3/0 Remoterig twin.  I just pulled the hardware out of the box tonight.  It all works very well with one minor glitch.  When I turn off the K3/0 control twin, it turns off the K3 radio as well.  I assume that's supposed to happen.  However, when I turn the twin back on, the K3 radio does not come on.  Has anyone else had this problem, and is there a fix?

Rick, N6NR