Topics

1

General discussion forum / INVALID VIRTUAL SERIAL PORT

« on: 2017-04-25, 00:19:45 »

I am consistently getting the error message upon start-up of Microbit.

I saw a solution in another posting but the solution it never worked for me either.

Everything seems to works okay - just a harrassment! ;-)

2

General discussion forum / K3 Mini Term Mode

« on: 2017-04-10, 15:09:51 »

I am remoteing with the Remote Rig twins, K3 Mini to my K3 at home.

Has been working good till all of a sudden. What happens is when I turn on the Mini, it goes into the Term mode as normal and I can hear stuff from the K3 at home BUT the Mini won't control the K3. The display is stuck on it's boot-up screen and the knobs does nothing, no control. I think the K3 hasn't shut off at home nor can I shut it off with no control from here. I have it hooked to a PC at home and a laptop here. Connecting with Teamviewer works well.

What should I look for?

thank you Dwight NS9I

3

General discussion forum / K3/0 Mini RRC-1258 MKII

« on: 2015-12-13, 18:23:17 »

I'm finding something not right in the CW keying with this combo. My call NS9I is copied as SI5I or some variation there-of when I send it from N1MM+ or with the paddles connected to the RRC Control.

LF Delay is set to 100 and Key delay is set to 150.

Am using USB to the Laptop as rig control

Am using ComExtra port in MM+ for Winkey for a CW port. Have the Com3 mode in RRC Control Keyer set to MODE-B, Winkeyer.

Somethings not right, any ideas?

thanks 73 Dwight NS9I