Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - PD1DL

Pages: [1]
1
General / Kenwood TM-D700 Nano app compatible ?
« on: 2018-12-27, 19:10:56 »
Does anyone know if it`s possible to connect the Kenwood Nano app directly to the RRC-1258MKII Kenwood TM-D700 ?

Here some info:

My Kenwood NANO app version 1.6.2 works fine to my Kenwood TS-2000. Phone is a Samsung Galaxy Note 8 with Android 8.0.0.
Works very good on WIFI , 3G, 4G internet to the TS-2000.

Settings in the radio RRC-1258MKII:

- Software 2.91
- COM 2 on 9600 Baud
- Mode 4 (Kenwood, Yaesu, Elecraft)


The following settings i tried for the Kenwood TM-D700:

- I am able to connect with the front of the Kenwood TM-D700 on the RRC-1258MKII controller flawless to the TM-D700 on different Baudrates
- Kenwood TM-D700 has the serial number 40500050 and G2.0 firmware.
- TM-D700 front connect without any trouble to my TS-2000. Direct in the TTL of the TS-2000 on the back and also with the RRC-1258MKII radio unit.

Now the trouble:

When i trying to connect the Kenwood NANO app from my phone with the TM-D700 i do get the connection to the RRC-1258MKII radio buth my TM-D700 front does not jump ON.
Running COM 2 on different baudrates and programmed the TM-D700 also on the right Baudrate as the RRC-1258MKII.

Tried different mode programs in the RRC-1258MKII and sure i using the right COM cable from the TM-D700 serial to the RRC1258.
Does anyone got the Kenwood NANO app working to the Kenwood TM-D700 ?

Please give my a reply :-)

73 PD1DL


2
Hi there and maybe you can help me with this problem.


I am running a webswitch 1216H and sinds a while sometimes my relays switch automatically OFF/ON. Sometimes i do not have this problem for a week and then it`s back again. I have changed my login name and password several times to see if that makes a different.

Here a copy of the system info of my webswitch 1216H:

Company      : Microbit
Product         : 1216H WebSwitch
Model           : Standard 1216L-4 or older
Software       : 3.5
Hardware      : 1
Bootloader    : 1.9
Build            : Oct 31 2013 17:44:13
S/N              : 1668
PID              : 4
Uptime         : 0 Days, 0 Hours, 7 Mins, 39 Secs
===================================
MAC             : (i changed blank)
IP address    : 192.168.2.5
Netmask       : 255.255.255.0
Gateway       : 192.168.2.1
DNS             : 192.168.2.1
===================================
Max available memory = 17701 bytes
Sun state                       : Unknown
Last Dynamic DNS status: Inactive
Rotator status                : Initialized
Ping status (watchdog)   : OK [2 ms]
Active profile: Profile 4


This out of control switching is very unpleasant. I have my PC hanging on my webswitch and sometimes it dropped out because the relay is going OFF/ON without touching it !

Anyone knows this problem ?


73 Dimitr PD1DL

Pages: [1]