16
Configuration, RRC 1258 / Re: RRC remote FW update flashing
« on: 2015-08-10, 10:19:26 »
Hello
I have also a problem
I canot update
vy 73 de Carsten
I have also a problem
I canot update
vy 73 de Carsten
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
General discussion forum / Re: AS-1289 - Android APP
« on: 2015-02-25, 16:01:42 »
Hy
No I didnīt.
Now I do - running well - tnx
vy 73 de Carsten
No I didnīt.
Now I do - running well - tnx
vy 73 de Carsten
18
Hardware, Cabling, Installations / Re: WiFI
« on: 2015-02-25, 15:30:21 »
Hy Mitch
If the access is limitated to one MAC each voucher - then we have an other problem.
I get all the time a voucher from up to 3 or 5 MACīs.
My problem is that I was not able to connect an close "hotspot" with WPA2-AES !
Now I know why th solution -> stop searching !
If only WWLAN is PA2-AES I use my free with other thinks.
vy 73 de Carsten
If the access is limitated to one MAC each voucher - then we have an other problem.
I get all the time a voucher from up to 3 or 5 MACīs.
My problem is that I was not able to connect an close "hotspot" with WPA2-AES !
Now I know why th solution -> stop searching !
If only WWLAN is PA2-AES I use my free with other thinks.
vy 73 de Carsten
19
Hardware, Cabling, Installations / Re: WiFI
« on: 2015-02-25, 14:25:56 »
Hello Mike
thanks for that .
Modul make WPA2-TKIP only !
WPA2-TKIP is erased from the 802.11 standart ... only WPA2-AES is now the "best".
Then I can stop searching the solution for the problems, I had in the last "hospots" using onyl WPA2-AES.
vy 73 de Carsten
thanks for that .
Modul make WPA2-TKIP only !
WPA2-TKIP is erased from the 802.11 standart ... only WPA2-AES is now the "best".
Then I can stop searching the solution for the problems, I had in the last "hospots" using onyl WPA2-AES.
vy 73 de Carsten
20
Hardware, Cabling, Installations / Re: WiFI
« on: 2015-02-25, 11:18:35 »
can the 2,4 Ghz switch between
WPA2 TKIP and WPA2 AES // WPA1 TKIP and WPA1 AES
?
WPA2 TKIP and WPA2 AES // WPA1 TKIP and WPA1 AES
?
21
Hardware, Cabling, Installations / WiFI
« on: 2015-02-25, 11:16:50 »
Hy
Is there a way to get an 5 GHz - 8021.11a WiFi Modul running iunside the RRC ?
best 73 de Carsten
DM1CG
Is there a way to get an 5 GHz - 8021.11a WiFi Modul running iunside the RRC ?
best 73 de Carsten
DM1CG
22
Configuration, RRC 1258 / Setup Manager WIN 8
« on: 2015-02-25, 11:11:14 »
HY
My unit isnīt connected via USB on my 32bit WIN8 laptop.
Install SETUP Manager with and without the driver for the COM drivers .
I see 2 COMs extra in my hardware manager if the RRC Unit is connected.
But Manager told me Device not conencted.
bets 73 de Carsten
DM1CG
My unit isnīt connected via USB on my 32bit WIN8 laptop.
Install SETUP Manager with and without the driver for the COM drivers .
I see 2 COMs extra in my hardware manager if the RRC Unit is connected.
But Manager told me Device not conencted.
bets 73 de Carsten
DM1CG
23
General discussion forum / AS-1289 - Android APP
« on: 2015-02-25, 09:10:58 »
HY Guys
Is there a android / IOS APP for controlling the antenna switch ?
best 73 de Carsten
DM1CG
Is there a android / IOS APP for controlling the antenna switch ?
best 73 de Carsten
DM1CG
24
General discussion forum / Webswitch and 4-Square
« on: 2014-12-02, 17:05:09 »
Hello all
get a new one 1216H
Is ther a way to use it to switch the 4 direktion of the 4 Square ?
I have a homemade version .
Is there a way to built my own matrix in using the 5 relays.
and also to make "new// more " bottons ?
http://www.oz1rdp.de/OZ1RDP_2012_Bilder_eng.html
73 de Carsten
get a new one 1216H
Is ther a way to use it to switch the 4 direktion of the 4 Square ?
I have a homemade version .
Is there a way to built my own matrix in using the 5 relays.
and also to make "new// more " bottons ?
http://www.oz1rdp.de/OZ1RDP_2012_Bilder_eng.html
73 de Carsten
25
General discussion forum / Re: Firmware Webshwitch 1216E
« on: 2014-11-17, 15:29:11 »
HY
now I have the problem , that i dint can connect the switch.
PWR off // on - same
AMber LED at ETH is all time on, if ETH pluged in the green is on too.
Amber LED is flashing.
Inside a grenn LED is all the time on.
At ETH is no activity - sniffed with wireshark
Is there a way to reset the switch ?
vy 73 de Carsten
DM1CG
now I have the problem , that i dint can connect the switch.
PWR off // on - same
AMber LED at ETH is all time on, if ETH pluged in the green is on too.
Amber LED is flashing.
Inside a grenn LED is all the time on.
At ETH is no activity - sniffed with wireshark
Is there a way to reset the switch ?
vy 73 de Carsten
DM1CG
26
Configuration, RRC 1258 / Re: IC 706 doing nothing
« on: 2014-10-13, 09:14:32 »
Hello
I removed the 2 straps - for photo, what is the error then ?
vy 73 de Carsten
I removed the 2 straps - for photo, what is the error then ?
vy 73 de Carsten
27
Configuration, RRC 1258 / Re: IC 706 doing nothing
« on: 2014-10-10, 15:21:24 »
Hello Jan & Mike
@DNS -OK
@ red Straps
All is with 0 Ohm and good.
I have a short with and without the straps between 7 & 8.
MIC GND and GND - looks normal
?
vy 73 de Carsten
DM1CG
@DNS -OK
@ red Straps
All is with 0 Ohm and good.
I have a short with and without the straps between 7 & 8.
MIC GND and GND - looks normal
?
vy 73 de Carsten
DM1CG
28
Configuration, RRC 1258 / Re: IC 706 doing nothing
« on: 2014-10-09, 19:12:49 »
I do some more tests
I see the device make a DNS to remoterig.com , for what ?
I set the device to DHCP - to see what happend.
A DHCP discover I see - also the DHCP Answer from the DHCP Server , but the device didnt do anything....
Only after sometime a new DCHP Discover ...
?
I see the device make a DNS to remoterig.com , for what ?
I set the device to DHCP - to see what happend.
A DHCP discover I see - also the DHCP Answer from the DHCP Server , but the device didnt do anything....
Only after sometime a new DCHP Discover ...
?
29
Configuration, RRC 1258 / IC 706 doing nothing
« on: 2014-10-09, 18:46:13 »
Hy Guys
my IC706 do not take open a connection to the Radio.
Very easy simple setup.
Reset all units - update to FW 2.8 - give them an IP.
Both in the same range no route or els needed.
Running on a switch , both units avalible on the webinterface.
My cable is tested on the IC706 - running well.
Jumpers on
If a push the power button on the Display - nothing happend.
Wireshark show me also no activity on the network.
Anyone has an idea ?
best 73 de Carsten
DM1CG
my IC706 do not take open a connection to the Radio.
Very easy simple setup.
Reset all units - update to FW 2.8 - give them an IP.
Both in the same range no route or els needed.
Running on a switch , both units avalible on the webinterface.
My cable is tested on the IC706 - running well.
Jumpers on
If a push the power button on the Display - nothing happend.
Wireshark show me also no activity on the network.
Anyone has an idea ?
best 73 de Carsten
DM1CG
30
Configuration, RRC 1258 / Re: no responce ETH0 - Remote RRC
« on: 2013-11-26, 12:41:35 »
Hello
The broken one has the Serial number: 4294967295 (1797)
The good one has teh serial number: 1776
Both are bougth at the same time (DF7KF)
Maybe the Conrtoller is a little scrubby
I will send the broken one to you.
Thanks
vy 73 de Carsten
DM1CG
The broken one has the Serial number: 4294967295 (1797)
The good one has teh serial number: 1776
Both are bougth at the same time (DF7KF)
Maybe the Conrtoller is a little scrubby
I will send the broken one to you.
Thanks
vy 73 de Carsten
DM1CG