46
Configuration, RRC 1258 / Re: Loss of CAT Control
« on: 2013-02-27, 11:56:05 »
Try to reboot both devices and check if everything still match your
settings
Guy ON4AOI
settings
Guy ON4AOI
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
47
General discussion forum / Re: Three mobile internet UK
« on: 2013-02-23, 13:14:39 »
Are they both set to port 5000 ? they need to be both the same radio+control
48
Configuration, RRC 1258 / Re: RRC1258 and MicroHAM devices
« on: 2013-02-14, 17:13:17 »
Finally had some spare time Eugene
this is for yaesu but kenwood is the same,
radio goes to RRC first and then to MKII
no other connection between radio and computer
GUY ON4AOI-OT7K
this is for yaesu but kenwood is the same,
radio goes to RRC first and then to MKII
no other connection between radio and computer
GUY ON4AOI-OT7K
49
General discussion forum / Re: Multiple 1216L Rotator control Units on a single Webswitch?
« on: 2013-02-05, 17:36:19 »
In fact he can Jan,
when he use 1 relay to switch a second relay with 2 (or more) separated contacts and switch the 2 wires from the bus
between the 2 x 1216L units (maybe with a second profile)
Guy ON4AOI
when he use 1 relay to switch a second relay with 2 (or more) separated contacts and switch the 2 wires from the bus
between the 2 x 1216L units (maybe with a second profile)
Guy ON4AOI
50
Configuration, RRC 1258 / Re: RRC1258 and MicroHAM devices
« on: 2013-02-01, 14:25:32 »
I Will make a working drawing during weekend Eugene
51
Configuration, RRC 1258 / Re: RRC1258 and MicroHAM devices
« on: 2013-01-31, 07:39:50 »
Hi Eugene,
yes it will change your drawing but like I wrote in previous reply
it works perfect
Guy ON4AOI
yes it will change your drawing but like I wrote in previous reply
it works perfect
Guy ON4AOI
52
Configuration, RRC 1258 / Re: RRC1258 and MicroHAM devices
« on: 2013-01-30, 20:28:12 »
Mitch,
I understand it different
Think Eugene is asking how to connect his radio both to his MKII and RRC1258
This is done easy Eugene
DONT USE the usb port of your radio but
connect your radio to com2 of the RRC1258
connect com1 from RRC1258 to MKII (setup virtual ports in MKII)
first setup in the RRC the serial like below
then setup the MKII so he sees the radio correct
CAT and SECOND CAT can be used for logging program and for example CWSKIMMER
Guy ON4AOI
I understand it different
Think Eugene is asking how to connect his radio both to his MKII and RRC1258
This is done easy Eugene
DONT USE the usb port of your radio but
connect your radio to com2 of the RRC1258
connect com1 from RRC1258 to MKII (setup virtual ports in MKII)
first setup in the RRC the serial like below
then setup the MKII so he sees the radio correct
CAT and SECOND CAT can be used for logging program and for example CWSKIMMER
Guy ON4AOI
53
General discussion forum / Re: CW Keying issue
« on: 2013-01-30, 19:45:13 »
Kari RFI could be solved with the new RFI filter they are selling now (microbit)
or put some cores on the cable from the router to the dsl modem
cores solved my problem.
Guy ON4AOI
or put some cores on the cable from the router to the dsl modem
cores solved my problem.
Guy ON4AOI
54
General discussion forum / Re: Powering Control Box in a vehicle with 13.8 Vdc?
« on: 2013-01-10, 16:44:07 »
Mike this can probably be solved by putting a capacitor(high value) near the RRC input
Guy ON4AOI
Guy ON4AOI
56
General discussion forum / Re: New beta firmware available
« on: 2013-01-06, 12:28:12 »
Jan,
I made the change from + to - and it is working ok again
something for the documents that not all chr are allowed anymore.
did you see my mail ?
Guy
I made the change from + to - and it is working ok again
something for the documents that not all chr are allowed anymore.
did you see my mail ?
Guy
57
General discussion forum / Re: New beta firmware available
« on: 2013-01-06, 11:57:03 »
Jan
I get the message "UNKNOWN RELAY MKII+SM 12V"
relay4 name is MKII+SM 12V
this is only in the ANDROID and IPOD APP and this name worked ok in previous releases
via windows http all is ok
Guy
I get the message "UNKNOWN RELAY MKII+SM 12V"
relay4 name is MKII+SM 12V
this is only in the ANDROID and IPOD APP and this name worked ok in previous releases
via windows http all is ok
Guy
58
General discussion forum / Re: New beta firmware available
« on: 2013-01-06, 11:04:41 »
Jan,
Android APP and also the IPOD APP or IPAD-IPhone
has the same problem just tested my Ipod
unknown relay (name I gave)
starting from 3.0 , not versions b4
Guy ON4AOI
Android APP and also the IPOD APP or IPAD-IPhone
has the same problem just tested my Ipod
unknown relay (name I gave)
starting from 3.0 , not versions b4
Guy ON4AOI
59
General discussion forum / Re: New beta firmware available
« on: 2013-01-06, 08:46:07 »
Jan,
found a bug, Relay4 can't be put on/off via Android,
BUT
This is not a problem under windows there it works ok
Guy ON4AOI
found a bug, Relay4 can't be put on/off via Android,
BUT
This is not a problem under windows there it works ok
Guy ON4AOI
60
General discussion forum / Re: New beta firmware available
« on: 2013-01-04, 15:14:07 »
Yep this is clear now for everyone Jan
Guy ON4AOI
Guy ON4AOI