Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - k5tri

Pages: 1 [2]
16
UPDATE: The naming issue is resolved by letting Windows search for an updated driver in Device Manager for each of the four COM ports.

17
Hi Mitch,

Which problem are you referring to as there are several? This setup worked for over a year with both N1MM and DX Lab Commander. All my machines
run 24/7 in High Power config regarding power plans. There is no sleeping for anything here.

Thanks,
Mike

18
Hi,

During CQ WW CW last weekend everything started out fine on Friday evening at the beginning of the contest. N1MM was connected to the radio
using the serial port via USB from the RemoteRig box, CW keying via N1MM and the USB Extra serial port was working reliably as well. After a few
hours I turned off the radio but let the computer running to catch some sleep.
Returning early in the morning and turning on the radio produced nothing. All over sudden N1MM could no longer connect to the radio/ RemoteRig
box via the built in serial port over USB. Manual keying via paddle still worked but eventually also went out. No more keying of the radio via USB serial
nor paddle. Keying with the paddle only produced continuous tone.

I rebooted both control and radio box (hard reset via power off/ on), rebooted both routers, and checked all settings. Note that I did not make any
changes the night before.

In the meantime CW keying via paddle somewhat returned in that after turning on the radio, the first few keying attempts only produce a long tone as
if the paddle hangs, but then after a few seconds it seems somewhat normal but not reliable. No USB cat control.

I managed to get CAT control via an USB-Serial adapter cable connected to COM2 on the control box, but that would not be a real workable solution.
All throughout, audio remained.

Today I also re-loaded the firmware on the control box (2.91) in hopes this would do the trick but nothing. The machine the box is now connected to
is a fresh installation of Win 10 Enterprise. After installing Microbit manager and the drivers for the serial ports, the ports only show as regular COM3 - 6
whilst before they were labeled for the RemoteRig box.

Any ideas on how to solve this issue are highly welcome!

73 Mike K5TRI / DK5TRI

19
General discussion forum / Re: FTDX-3000 twin config
« on: 2019-11-23, 16:10:20 »
In case you missed it:
http://www.remoterig.com/forum/index.php?topic=1790.msg7685#msg7685

73,
Mitch DJ0QN / K7DX

Yes, I did find this thread but it's six years old, so was looking for more recent information. Based on the thread from back then, the FTDX-3000 twin config
does not look like a viable option and I'm back to Flex 6400 + Maestro. I was hoping to get it done with the Yaesu setup as it would be less expensive.

73 Mike K5TRI / DK5TRI

20
General discussion forum / FTDX-3000 twin config
« on: 2019-11-23, 04:05:53 »
Hi,

I'm looking for people who have hands on experience, either successful or not, running the aforementioned radio in a twin config.

73 Mike K5TRI/ DK5TRI

21
Hmm .. interesting. UDP is a connection less transport where you just send the packet but don't care if it arrives.

It seems to work fine for now, next time this shows up I'll try to reboot the routers on both ends. The one in Germany
is the Telekom provided one, the one here in my house is a Ubiquiti router.

73 Mike K5TRI / DK5TRI

22
Curious, which buffer are you referring to and which routers did you see this happen with?
Will try that but would like to understand more.

73 Mike

23
I haven't touched anything, nothing changed, this behavior appeared out of the blue. It turned out to only appear on
USB/ LSB but not CW. I fiddled a bit with the input and output settings and for now it seems to work fine. I'll need to
stress test to ensure that fixed it.

73 Mike K5TRI

24
Hi,

About two days ago I encountered a weird issue. My Remote Rig setup was working perfectly fine and stable between my shack in Redmond, WA and my
remote station in Germany.
Now when I turn on the radio, I get full display but no RX audio. After a few seconds the controls then freeze and I can't even power off the radio using the
power button on the control head. A few seconds after the freeze, the radio powers off by itself.

I tried a hard reboot (a.k.a. power off) at both ends to no avail. No config changes have been made between the two states.

73 Mike K5TRI

25
Feature Requests / Re: SSL encryption for network traffic
« on: 2018-08-06, 21:37:08 »
Care to share more of the internals then to remove those concerns? How is the TCP/IP stack implemented? What about the webserver part?

73 Mike

p.s.: BTW. beautiful location of your remote station :)

26
Feature Requests / Re: SSL encryption for network traffic
« on: 2018-08-06, 06:24:21 »
Which OS is running inside the RR boxes? I do understand very well that I don't need a Linux kernel on a device to run
malicious code. There are plenty of other ways. You are running an TCP/IP stack in that box. You are running a web server
in that box.

So far the only responses I've seen to this questions seem like excuses as to why there is no need to secure a device on the
network. This can't be a serious response from anybody who even only has 101 level knowledge of network security.

As it stands right now I have to take extra steps to make this solution more secure myself because the manufacturer doesn't
seem to care to provide a secure solution. Very poor customer service in my book.

27
Feature Requests / Re: SSL encryption for network traffic
« on: 2018-07-31, 02:44:13 »
For my own understanding, once someone gets in to the web interface what can occur from there. Also, what can be gained from looking at or accessing the RRC traffic?

Sent from my SM-T350 using Tapatalk

Once you get into the RR box and root it you have a device on the local network from which you can then start other attacks.  Protecting the RR itself is just
one part of the equation. Protecting the network is the much more important one.

28
General discussion forum / Re: Twin setup for TS-2000
« on: 2018-07-31, 02:42:14 »
Hi Mike,

Look here:
http://www.remoterig.com/forum/index.php?topic=1076.0

gl Willi, DF1NP

Hi Willi,

As mentioned in my original post, the D700 control panel (which is the same as mentioned in the post you linked) is not really the best user experience
compared to the full panel of the TS-2000.

I guess the question really is if a radio even needs to be connected to the RemoteRig boxes to send stuff like mic audio and CW paddle keying.
If not, then indeed remote control software could be the ticket with the RR boxes serving the hardware devices.

73 Mike K5TRI/ DK5TRI

29
Feature Requests / SSL encryption for network traffic
« on: 2018-07-22, 17:16:52 »
Are there any plans to add SSL/TLS encryption to the RemoteRig boxes? Currently all traffic for example for the web interface is
being sent in clear text over the public Internet which makes it vulnerable for attacks.

73 Mike K5TRI

30
General discussion forum / Twin setup for TS-2000
« on: 2018-07-22, 17:08:55 »
Hi,

I'm currently using RemoteRig with a TS-480 between my home QTH in Redmond, WA and my station in Germany with great success.
As a next step to upgrade I was considering the TS-590sg twin setup as I already own one. This would aside from a much better receiver
get me way better user interface. The TS-590sg however doesn't have 2m or 70cm which brings me to the TS-2000 which I also owned.
VHF/UHF activity in Europe seems much stronger than in the US, so it would be great to be able to use a TS-2000 pair to preserver the
user interface as the D700 control panel doesn't seem too comfortable, especially in contest operations.

Any plans to enable this feature?

73 Mike K5TRI/ DK5TRI

Pages: 1 [2]