Messages

61

Allmänt diskussionsforum / Re: RCC Micro PC Client

« on: 2011-04-12, 14:01:16 »

Sorry last post should be like this :4-Kenwood, yaesu, Elecraft. Under UDP Comports i have selected: Microbit Serial UDPDevice com 8


73 Rune

62

Allmänt diskussionsforum / Re: RCC Micro PC Client

« on: 2011-04-12, 13:44:20 »

Hi Mike

I use com 1 one the RRC radio end and also com 1 on RRC Client end  when using the ordenary Remoterig boxes and all is working fine using HRD or TRX-Mmanager. This tels me that the system is working.

When i install PC Micro client software and using the USB micro client dongle i have got two virtual com ports in my system com 7 and com 8. Under RRC Settings software and under COM 1 "window" i have selected:
4-Kenwood, yaesu, Elecraft. Under UDP Comports i have selected: Microbit Serial UDPDevice (com

From what i understand i should now select com 8 under HRD 19200 to get this working. Is there something that i have forgoten or dont understand ?.

73 Rune LA7THA
 

63

Allmänt diskussionsforum / RCC Micro PC Client

« on: 2011-04-12, 12:20:56 »

Hi

I just invested in a Micro PC client  but no luck so far to get it work.

When i use HRD whit my remoterig RRC radio and RRC Client in programmode 4 using Com 1 baude set to 19200 on RRC radio and Client all work fine using HRD or TRX-Manager.
 I installed software (ver 1.1.2) for Micro PC client and got all my settings done.
I use mode 4 on com 1 and UDP comport is com 8.
When i connect it looks like i have the SIP ok it tels me connected to sip:XXXXXXXXXX.
I also have a green "LED" indicating that my UDP com port is ok.
When i start HRD connect to UDP com 8 19200 baud i cant gett any connection to the radio.

If i go back and use my remoterig RRC Client and RRC radio in mode 4 all work ok.
Any sugestion here gents

73 Rune LA7THA

64

General discussion forum / Re: WEB SWITCH

« on: 2010-11-24, 21:11:33 »

Hi

I don't need 57600 baud to switch my antenna faster, but from what i remember the TS480 when using
Front/Remote head you need to set the radio RCC to Program mode 5 and baud rate to 57600 ?.
Is there something that i have lost here ?

73 Rune LA7THA

65

General discussion forum / WEB SWITCH

« on: 2010-11-24, 19:16:30 »

HI Gents

I got the web-switch to read/sniff data from the rig and working @ 9600 baud.
This is ok when you using HRD/TRX-Manager etc. Can the web-switch handle 57600 baud ?.
When i try 57600 it don't work, or maybe it is the opto circuit i used that don't handle this, not sure.
My friend LA9KKA want to make something so we can use the web-switch when HRD/TRX-Manager
is not in use. He want to get this to work when the Remote-head is used.
He basically wants make a circuit that read data from the rig when RCC-Radio are in program mode 5.
From what i know this is not possible today, want to use the web switch for change antennas automatically
when change band etc.

73 Rune LA7THA

66

General discussion forum / Re: Kenwood TS-480 series front panels to be available soon

« on: 2010-11-02, 17:29:51 »

Any news about front panel, is there any delaer that have this in stock now?.

67

General discussion forum / Re: Multiple user on Remoterig System.

« on: 2010-10-07, 15:40:08 »

Hi

New firmware in all RRC Boxes, latest version.
Still ok using HRD/TRX-Manager but when using Remotehead we get the yellow LED SIP connection but Display dont turn ON.
If there was someting wrong whit cable i would not get the SIP connection ? or ?
And it also work ok using HRD/TRX-Manager

73 Rune LA7THA

68

General discussion forum / Multiple user on Remoterig System.

« on: 2010-10-07, 13:40:02 »

Hi

We are three users on the remoterig system here.
Radio RRC settings are Programmode 4 Generric for use whit HRD, and Programmode 5
TS480 for remotehead use.
When i use the system using HRD or TRX-Manager all is ok, Programe mode 4 in Control end and Radio end. When my friend try to use the system using the Dispaly/Remotehead we cant get it to work. We change the setting in Radio RRC and Control RRC to programode 5. Baudrate in Control end is  also 57600, and controlpanel settings to YES.
When he press the ON buton on remotehead we get the yellow SIP connection but
Radio/Display do not turn ON. using Hardware 3, software version 0.0.2.7 Build Feb 18 2010

Any sugestion here.

73 Rune LA7THA

69

General discussion forum / Re: TS-480 RFI - more information

« on: 2010-10-07, 13:12:41 »

Did the change on my cable GND/GNDE and all Problem now gone, no bad modulation and also i can use PROC in the radio and modulation is Good:-)

70

General discussion forum / Re: TS-480 RFI - more information

« on: 2010-09-04, 02:39:27 »

Hi Gents

I use Remoterig V1 TS480 and Acom 2000. Have used 1 Ton of ferite, decoupling capacitors etc. My wiring between RCC and Ts480 is all Shielded.
I also noticed that when Proc is on the audio out geting usles.
Hope someone find a solution on this

73 de Rune LA7THA

71

General discussion forum / Remote head and HRD

« on: 2010-09-04, 02:25:26 »

Hi

Is there anyone that using Remote head and Hamradio Deluxe at the same time.
How can this be done

73 de LA7THA

72

General discussion forum / Re: HRD and remoterig

« on: 2010-03-04, 21:52:52 »

Hi Again

I am using KW TS480 here, the radio is on my remote qth. I have to go there and connect it to a PC and see if that works. I can send this info to the HRD user group and see if there is anyone that have problems using TS480 and HRD version 5 and the
function " A=B"

73 Rune LA7THA

73

General discussion forum / HRD and remoterig

« on: 2010-03-04, 11:24:46 »

Hi all, i have used HRD and remoterig for some time.
I can not get the function VFO A=B to work via remoterig.
I use HRD version 5, is there anyone that have this system working  and wonder if this problem is only here.

73 Rune LA7THA

74

General discussion forum / Re: ACOM 2000A

« on: 2010-02-26, 19:58:30 »

Hello

I have used Acom 2000 on my remote qth for 3 years now, and it all work ok.
You need a spare serial port and software. Go to Acom web page and download software, it works.
I am using TRX-Manager witch also have the software trx-Acom and it all work fine.
I can send i a screen shot if you like.

73 De RUne LA7THA

75

Hårdvara, Kablage, Installationer / KW TS 480 used with Hamradio Deluxe and Digital Master

« on: 2009-12-19, 20:40:13 »

Hi All

I have used Remoterig on cw for som time and are very happy about the result here.
I want to try digi mode psk31 and rtty using Digital Master. I made some cable here for the sound
to and from radio but have not get any sound/modulation to the radio. I decode psk31 and that are working fine. When i try to transmit i can not get any modulation out. Is there something that i have totaly forgoten ?. When i select FM or AM and then select cq button i can se that i am Keying the radio. Back in ssb mode i can also se that i keying the radio but nothing is happening and loks that i dont have any modulation. Any suggestion here ?.