Webswitch 1216H Support in English > Configuration, Webswitch 1216H

Monoflop functionality for 1216H

(1/2) > >>

HB9EKK:
Does 1216H provide for a monoflop function? Means, that I can activate a button just for 1 second to steer a microswitch?

Jan (Microbit):
Not from the web pages, but you could achieve something like that using a pulse command, see page:

http://www.webswitch.se/wp/?page_id=342

Remote_Mike:
Unfortunately the 1216H doesn't support real monoflop functionality. Forget about the HTML commands for this function. Use a real monoflop as NE555 or similar and switch on/off a relay for triggering the NE555.
I am using a K3 and this TRX needs a kind of impulse for startup.

Jan (Microbit):

--- Quote from: Remote_Mike on 2013-01-30, 21:14:41 ---Unfortunately the 1216H doesn't support real monoflop functionality. Forget about the HTML commands for this function. Use a real monoflop as NE555 or similar and switch on/off a relay for triggering the NE555.
I am using a K3 and this TRX needs a kind of impulse for startup.

--- End quote ---
How do you define a "real monoflop functionality"?

sm2o:
It's not needed for triggering the pwr to K3. You can have it on for ever, just switch it off before you send the "pwr off" command via the serial port

/mike

Navigation

[0] Message Index

[#] Next page