Author Topic: Anyone tried a Kenwood TM-710 or TM-V71?  (Read 5458 times)

DF3FX

  • Newbie
  • *
  • Posts: 22
    • View Profile
Anyone tried a Kenwood TM-710 or TM-V71?
« on: 2010-03-05, 14:34:03 »
A Friend of mine, I told about my project was very interested to know if somebody just tried to know if remoterig
also works for Kenwood TM-710 or TM-V71 VHF/UHF mobile Radios as he only owns a VHF UHF license.


73's

Felix
----------
RRig with Ts-480 SAT - Distance 1000km :-)
----------

OZ1MAR

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Anyone tried a Kenwood TM-710 or TM-V71?
« Reply #1 on: 2011-10-13, 11:31:53 »
I Have just made it work from my livingroom to my office (local lan) on a Kenwood TM-V71E.
Notes on configuration
Does not work with the kenwood mode, but use program mode 3, Yaesu 8x7.
Start with the kenwood D710 AUX/MIC configuration, but swop the two grounds in both ends  (MIC ground is on pin4, and GND is on pin6.)
In the Radio end ad 8 volt PWR to pin 7 = light in michrophone. Keypad on mic not connected/working.
Jumper 1 not installed
Jumper 2 installed. (8 volt).
Hope this can help any one out there.
Codec inp gain 38 (might need some adjustment).
Martin OZ1MAR

SM0SHG

  • Jr. Member
  • **
  • Posts: 51
    • View Profile
Re: Anyone tried a Kenwood TM-710 or TM-V71?
« Reply #2 on: 2011-10-14, 18:09:11 »
I've used RR with TM-D710 for some time. And it works great. In the manual you will find instructions on how to connect.
Adde, SM0SHG