Author Topic: CW with IC-706  (Read 3125 times)

LA0BY

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
CW with IC-706
« on: 2010-04-11, 15:41:35 »
Hi all,
just tried my new RemoteRig MkII for the first time. Everything seems to work fine, except for the CW keying. When I key at the RRC Controller PAD input, nothing happens at the RRC Radio PAD output. I can hear the side tone from the IC-706 panel, but no keying of the IC-706 radio. Is there any configuration I need to do e.g. in the I/O settings?

73, Stefan (LA0BY)

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 2853
    • View Profile
    • sm2oan
    • Email
Re: CW with IC-706
« Reply #1 on: 2010-04-11, 19:28:11 »
Hi

Yes you have to decide which output you wan't to use för the keyer output see under the IO meny in the Radio RCC. Its desciribed here http://www.remoterig.com/en/common_configs.htm

73 de mike

LA0BY

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Re: CW with IC-706
« Reply #2 on: 2010-04-17, 08:19:17 »
Many thanks Mike. It works fine now with OUT1 activated and mode set to Keyer.  :)