RRC 1258 Support in English > Configuration of Routers, Firewalls, etc

RR DDNS Database not working for me

(1/8) > >>

n6xi:
I followed the instructions on pages 58-59 of Rev. A32 of the manual "Remoterig dynamic dns service" to set up the Dynamic DNS settings page of my Remote RRC." I got an Own host name string of xxxxxxxx.ddns.remoterig.com and a Username and Password. When I attempt to use this string as the SIP contact string on the Control RRC, it fails to connect. If I use the actual external IP address, the RRCs connect and function properly. Using the Web site ddns status tester, I get "xxxxxxxx not found!" Is the xxxxxxxx... string formed locally? If so, how do I get it into the database? What might I be doing wrong?

Thanks & 73,
Rick N6XI

sm2o:
Hi check your status page in the Radio-RRC, I guess you will see that the DNS  fails and the DNS function need to work otherwise the DDNS will not be updated. Probably the DNS ip number is not correct.

The DDNS databas post for your RRC will be created automatically when the RRC connect, you do not need to do any manual registration

73 de mike

dj0qn:
Rick,

You can also verify when it last updated at: http://ddns.remoterig.com/status/

73,
Mitch DJ0QN / K7DX

n6xi:
Mike, the DNS status page for the Remote RRC reports "OK, remoterig.com = 193.202.110.185"

Mitch, http://ddns.remoterig.com/status/ reports only "xxxxxxxx not found!"

/Rick

dj0qn:
Hi Rick,

This is another tool that you can use to determine when a problem began to occur,
since the RRC messages are sometimes cryptic. In your case, it indicates that it
never worked to begin with.

73,
Mitch DJ0QN / K7DX

Navigation

[0] Message Index

[#] Next page