RRC 1258 Support in English > Configuration, RRC 1258

icom ic 7100 and el key

(1/2) > >>

ik4vfd:
hello
I saw that the front of the 7100, has an entry for the key elettronic, be possible to use, remotely, a paddle from them directly, without using the keyer of control?
thanks
rodolfo

oz1rh:
No, do as described in the manual. Your paddel should be connected to the control RemoteRig. At the radioend set the IC-7100 for straight key and connect the cable from the radio RemoteRig to the key jack on the IC-7100. I have tried and it works fb even with quite high latency from the internet connections (my radioend has 3G mobile broadband, not the best connection for streaming).

73, Palle, OZ1RH.

VK3OE:
Hello Palle,
I am having trouble with my IC-7100 sending sensible CW as the CW is broken up, sometimes it sends the correct characters and sometimes not.

Could you let me know what your CW settings are please, for the IC-7100 and the remote rig boxes.

This is very frustrating as my IC 7000 worked fb on CW, now it is a whole new process to get CW working again.

Many thanks,
Andrew
VK3OE

VK3OE:
PS,
I am using HRD and DM780 for the CW, the local CW sidetone from the remote rig is great. The connections are all as described earlier in this post.

Andrew
VK3OE

sm2o:
You probably have a Internet connection with lot of jitter. If you set the PC to ping 50 times you will see it. The Key delay should be set to at least 50% of the normal variations in ping time. Try with 50 ms, it's no problem in practical use even if your jitter is not that big.

73 de mike

Navigation

[0] Message Index

[#] Next page