RRC 1258 Support in English > Configuration, RRC 1258

Firmware update problem

(1/1)

Stan W6VQ:
I successfully updated the firmware on Wi-Fi optioned RRC's from 2.74 to 2.75 then decided to also update the RRC's used
with my IC-7100 from 2.72 to 2.75.  All went well with the radio side but failed on the control side.  Radio no longer powers
up thru RRC but fine with head connected directly.
Doing a read shows the following- VRS=005  Firmware=000.000.002  Boot=N/A  HW=006    Serial # C3092
Computer running XP and USB port functioning normally.  Rebooted and tried a second time with same results.
Sequence seemed to show everything normal with RRC restarting after successful download and update.
Anything else to try?

sm2o:
Have you try to connect to the box via the webinterface ?

/mike

Stan W6VQ:
Updated RRC thru web browser and correctly shows 2.75 and radio now connects.
Setup manager (1.24) still shows 000.000.002 instead of 2.75 but seems to function
normally.  TNX& 73, Stan

Jan (Microbit):
Thank you for pointing out that the FW version is not displayed as it should in Setup Manager. We will fix that in the coming release.

Navigation

[0] Message Index