Author Topic: Frequency refresh  (Read 7378 times)

hb9edm

  • Jr. Member
  • **
  • Posts: 39
    • View Profile
Frequency refresh
« on: 2014-09-27, 17:44:43 »
Hello remoterig guys!
With this application you have made ​​a big step forward in the remoterig suite!

You have managed to do better than what I had thought with this post:

http://www.remoterig.com/forum/index.php?topic=2402.0

Congratulations and thanks for the good work!!!
THKS THKS

______________________________________________________________________________


Now we come to the problems :-)

With the app I can connect without problems to the radio but when I change the "BAND" on the display the frequency don't change.

I'm sure the radio band changes . In addition, it also changes the " MODE" 40m-lsb, 20m-usb, .....and this appears on the phone display .

Where I'm wrong?

All the test are done in a LAN with RRC connected via cable and obviously the phone via wifi.



For the moment is everything!
I'm waiting further developments!   :-)

73 best
HB9EDMarco
« Last Edit: 2014-09-27, 22:59:15 by hb9edm »
HB9EDM

Remote setup:
TS480 - Expert 1K - ERC rotator - Heil

hb9edm

  • Jr. Member
  • **
  • Posts: 39
    • View Profile
Re: Frequency refresh
« Reply #1 on: 2014-10-03, 16:31:36 »
No one has identified this problem?

I tried to change the baud rate of the com2 , I tried to change other connection parameters but no change.

The Android app does NOT change frequency.

thks!
HB9EDM
HB9EDM

Remote setup:
TS480 - Expert 1K - ERC rotator - Heil

dl2nd

  • Jr. Member
  • **
  • Posts: 50
    • View Profile
Re: Frequency refresh
« Reply #2 on: 2014-10-30, 22:22:01 »
Hi Marco,

I have exactly the same Problem.
I am using a Samsung Galaxy Note 3 and Android 4.4.2.

73,
Uwe

« Last Edit: 2014-10-30, 22:26:08 by dl2nd »
RRC 2.91, Galaxy Note 3 with Android 5.0, Kenwood (K) Nano (TS-2000), RRC-Micro 1274B

roland

  • Guest
Re: Frequency refresh
« Reply #3 on: 2014-10-31, 20:21:30 »
Hi guys.

First of all, sorry I haven't given any response before now.
I have been assigned into other things and missed this.

We will look into to this. In case you want me to check your RRC answers
here from Microbit you can send me the address/user/password in a PM.