RRC-1258 problem with Lan connection

[sv1oz]

Hi all,

I have a problem since many time ago, that comes and go.
The local RRC is connected with my router via LAN cable but the "power" green led in front blinks / (not stable). The LAN green led in the back side of RRC is stable on
With this led blinking no connection begin when I press power ON and the error sound comes after a while.
When I power on and off many times the RRC I manage some times to have the power led stable and as a result then the remote system powers on.
I test the connection of remote RRC with my laptop and I can see the remote menu, that meens that IP link is ok.
I changed the Lan cable also with other new but same result.
Version of both RRC's is 2.81 and I have for remote a V/U Kenwood V71

Any idea? Hardware problem? Please any reply will help me out.

Dimitris

[sm2o]

Hi

I don't think it's a hardware problem. If you look at the status page in the control-RRC you may see the reason of the problem. I guess it's a dns problem.
It's no idea to try to connect as long as the PWR LED is flashing, instead look for  the reason at the status page

73 de mike