Author Topic: IC-7100+SIGNALINK+RRC-1258=HELP  (Read 9098 times)

ag4uj

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
IC-7100+SIGNALINK+RRC-1258=HELP
« on: 2016-06-05, 03:22:27 »
Hello name here is Jim.  I have my IC-7100 and RRC-1258 working no problems. Next i want to add a Signalink USB box to the system by connecting it to the remote head via the mic port. So i guess my problem is i need a pinout for a cable.  Has anyone tried this before?

Thanks in advance.

Jim AG4UJ

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #1 on: 2016-06-05, 19:58:33 »
Jim,

I have never tried that configuration, but using a Signalink is standard for all rigs:
do not connect to the head, connect to the MIC jack of the control RRC instead.
Also connect the SP jack of the RRC for audio. You can basically program the RRC
using the red straps to use any type of microphone cable (with RJ45, but I would
assume you just use the IC-7100 microphone and a Signalink cable for that rig.

73,
Mitch DJ0QN / K7DX

ag4uj

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #2 on: 2016-06-05, 21:16:16 »
Mitch the cable i have is a 6 pin din that plugs into the main body of the radio. Are you saying plug the signalink into the i/o port on the RRC? What cable do i need for that. This is all new to me so please bear with me. The RRC-1258 works great it is a joy to use.

Jim AG4UJ

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #3 on: 2016-06-05, 21:48:55 »
Jim,

No, I said that it plugs into the AUX/MIC jack of the RRC, where the microphone cable
from the IC-7100 would normally go.

Imagine that the RRC is just a long-distance extension of your rig's microphone and
speaker jacks. Instead of plugging the Signalink into the rig, you would just plug them
into the RRC instead.

73,
Mitch DJ0QN / K7DX

ag4uj

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #4 on: 2016-06-05, 22:28:14 »
Mitch what type of cable would i use just a plane cat 5 cable?

Jim AG4UJ

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #5 on: 2016-06-05, 22:40:06 »
Jim,

Use whatever Signalink adapter cable you use. Make sure the strapping matches it.

73
Mitch DJ0QN / K7DX

ag4uj

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #6 on: 2016-06-05, 23:07:58 »
Ok Thanks for the help i will try that...

Jim AG4UJ

KB8CR

  • Full Member
  • ***
  • Posts: 104
  • IC-7100 and IC-706 on RRC's
    • View Profile
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #7 on: 2016-08-18, 15:46:26 »
I was wondering......if you plug the Signalink into the Aux/Mic jack where the control head normally goes, how do you control the radio freq, etc?

Charlie KB8CR

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #8 on: 2016-08-18, 16:42:45 »
By using CAT.

73,
Mitch DJ0QN / K7DX

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #9 on: 2016-08-18, 17:37:50 »
But if you want to use the frontpanel, you connect the signallink to the Mic jack in the frontpanel. Like it's described on the web for the IC-706

73 de mike

oz1rh

  • Full Member
  • ***
  • Posts: 106
    • View Profile
Re: IC-7100+SIGNALINK+RRC-1258=HELP
« Reply #10 on: 2016-08-21, 03:11:50 »
I have the setup running as described by Mike: SignaLink to the Mic jack in the IC-7100 frontpanel using a standard Ethernet cable. My SignaLink is strapped accordingly by comparing the pin output of the Mic jack and the SignaLink, see www.tigertronics.com/sl_wirebm.htm#ICOM That way I can make digital QSO's by RemoteRig.

It works though it is not too smart to have the radio RRC digitizing the audio, the control RRC then makes the audio analog so the SignaLink can digitize the audio once more and feed it to the pc. The control RRC should be able to feed the digitized audio to the pc via the USB-cable.

73, Palle, OZ1RH